1Pair Black+Red Solar Panel Extension Cable Wire Solar Connectors 10/12/14 AWG

Description

Product Description
These are branch cables in the PV connection style, which are approved by CE, TÜV. The solar module cable extensions are used to extend or cut the module output cables anywhere along the cable to provide the required length of the male and female cables to run from a series of modules to a combination box or a longer cable.
★ Application: Specially developed for the connection of components in a photovoltaic system
outside of buildings and devices with high mechanical requirements and extreme weather
Conditions. For permanent installations.
★ General characteristics: Cable made of electron beam cross-linked insulation and coating; high resistance to heat, cold, oil, abrasion, ozone,
UV and weather; with improved reaction in case of fire. low smoke, halogen free, flame free,
flame retardant; flexible, easy to remove, very little space required, extreme, extreme
mechanically robust, very long life.
6 square single core photovoltaic cable (10 AWG)
● Nominal section: 6 mm2
● Model: PV1-F
● Rated current: 70A
● Number of cores: NO. 1
● Conductor: copper wire structure NO./mm 84 / 0.30
● Conductor wire diameter: 3.42 mm
● Minimum insulation wall thickness: 0.5 mm
● Minimum wall thickness of the jacket: 0.5 mm
● Finished wire diameter: 6.9 ± 0.1 mm
● Conductor resistance (20 ℃): ≤ 3.39 Ω / km
● Test voltage kV / min: 6.5 / 5 No breakdown
● Nominal temperature: -40 ~ +90 ℃
● Maximum conductor temperature: + 120 ° C.
● Permissible reference short-circuit temperature: 200 ℃ 5S
● Lifespan:> 25 years (-40 ~ +90 ℃)
● Nominal voltage: DC: 1.8 kV AC U / U: 0.6 / 1 kV
● Working environment temperature ℃: -40 ~ +90
● Operating voltage AC / DC (KV): 0.6 ~ 1.0 / 1.8
● Weather resistance: UV
● Flame retardant: single vertical combustion (IEC60332-1)
● Sun resistant test: HD605 / A1
● Cable ozone resistance test: EN50396
● Smoke density: IEC61034, EN50268-2
● Halogen acid release: IEC670754-1 EN50267-2-1
● Weight: 0.09 kg / m
4 square single-core photovoltaic cable （12AWG）
Cutting area: 4.0 mm2
Rated current: 55A
Nominal voltage: 600 V / 1800 V (AC / DC)
Ambient temperature range: -40 ° C〜 + 125 ° C.
Strand design (No.Xø (mm)): 56 / 0.30
Connector type: PV connector
Conductor diameter: 2.06 mm,
Outside diameter: 6.05 mm
2.5 square meters of single core photovoltaic cable (14 AWG)
● Nominal section: 2.5 mm2
● Rated current: 31A
● Number of cores: NO. 1
● Conductor: copper wire structure NO./mm 51 / 0.25
● Conductor wire diameter: 2.02 mm
● Minimum insulation wall thickness: 0.5 mm
● Minimum wall thickness of the jacket: 0.5 mm
● Finished wire diameter: 5.45 ± 0.1 mm
● Conductor resistance (20 ℃): ≤ 8.21 Ω / km
● Test voltage kV / min: 6.5 / 5 No breakdown
● Nominal temperature: -40 ~ +90 ℃
● Maximum conductor temperature: + 120 ° C.
● Permissible reference short-circuit temperature: 200 ℃ 5S
● Lifespan:> 25 years (-40 ~ +90 ℃)
● Nominal voltage: DC: 1.8 kV AC U / U: 0.6 / 1 kV
● Working environment temperature ℃: -40 ~ +90
● Operating voltage AC / DC (KV): 0.6 ~ 1.0 / 1.8
● Weather resistance: UV
● Flame retardant: single vertical combustion (IEC60332-1)
● Sun resistant test: HD605 / A1
● Cable ozone resistance test: EN50396
● Smoke density: IEC61034, EN50268-2
● Release of halogen acid: IEC670754-1 EN50267-2-1
● Weight: 0.06 kg / m
Product details
Product No. PV connector B2
Nominal voltage TÜV 1000 V DC / UL 600 V DC
Suitable cable cross-sections 2.5 mm2 ~ 6.0 mm2 / 14AWG ~ 10AWG
Pin size 4.0 mm
Test voltage DC 8KV (1min)
Pollution degree 2
Protection class class II
Contact material copper, tinned
Contact resistance 5mW
Connector material PPO
Degree of protection IP IP67 (IEC 60529)
Retraction force 3 50N
Insertion force 50N
Temperature range -40 ° C ~ + 85 ° C.
Flame class UL94V - 0
Solar connection waterproof IP67.
powered by