-40%

5.5HP High Pressure Powered Air Compressor Gasoline Scuba Paintball Tanks Refill

$ 1398.67

Availability: 30 in stock
  • Country/Region of Manufacture: China
  • Brand: HPDAVV
  • Condition: New

    Description

    Items Description
    petrol engine driven series (HONDA)
    Charging Rate: 85-100L/min; 3.0-3.5cfm
    Suction pressure: atmosphere
    Working pressure: 20-30MPa, 200-300bar, 3000-4500psi
    Media: air
    No.of stage and cylinder: 4
    Petrol engine: HONDA GX160 / 5hp, manual start
    Cooling: air cooled
    Driven: belt driven
    Shout down:Automatic stop
    Pressure indicate:Gauge
    Protection :Safety valve in last stage
    Filtration:water separator and oil filter
    Lubricant: ISO grade 100/150 SAE 40/50 synthetic compressor oil
    Dimension:35*19*19 inch
    Weight:110 lbs
    Noise:Less than 70 dB(A)
    Package list:
    Valve plate gasket
    Primary piston ring
    Secondary intake valve plate
    Primary intake valve
    Primary exhaust spring
    Cushion
    Quick connect hose + handwheel
    Notice:
    1. The bottle filling of the air compressor must be greater than the pressure of the gas cylinder to fill the bottle! 【Air Compressor Pressure>Cylinder Pressure】
    2. Suggestion for bottle filling: 3L-12 L / 3L≤ 12 L
    3. Use of gas cylinder: Fire fighting, diving breathing
    4. Recommended operating time of the machine (machine operating load range): The temperature cannot exceed 85°C
    5. Estimated filling time:
    Recommendations for filling 12L gas cylinders:
    1) The cylinder pressure is 200bar, and the estimated time is 24 minutes
    2) The cylinder pressure is 300bar, and the estimated time is 36 minutes
    Note:
    This series are high pressure air compressor. It compresses atmosphere air go to pressure 20/30Mpa, 3000/4500psi, after be purified and separated by the filter and separator.
    It discharge clean air accords to GB18435-2001 breathing air standard.
    It is widely be used for breathing of diving and fire fighting; paintball PCP shooting and other high pressure filed industries by its reliability, durability and portability.
    ■ Check the electric voltage in nameplate is same as your local electric supply.
    ■ Check the lubricate oil has been put in before running.
    ■ Increase rated pressure setting is forbidden.
    ■ There is potential danger of pipe burst or connect fitting blow off under high pressure, please avoid body too near compressor when it running.
    ■ if there are no auto stop function, don't leave compressor until it reach rated pressure and shut down it by manual.