NEW 12 Volt Onboard Compressor Kit Off Road Air Locker Air Tires Air Horn + Tank

Description

This lising is for a brand New 12 Volt Onboard Air Kit with 1 - 0.5 Gallon Air Tank + compressor + all accessories.
Perfect for a multitude of air applications: air suspension,
air horns, inflatables, flat tires & small air tools.
These onboard air systems are all 33% duty cycle (20 minutes @ 100 psi) and increase air volume depending on the tank size (for compressed air storage).
Each onboard air system comes complete with a steel air tank, pressure switch, relay(s), 1 -12 Volt compressor, fittings, electrical connectors + hose + air accessory kit housed in a heavy duty zipped canvas bag for easy storage on the go.
Also available in 2.5 gallon tanks and  / or 24V - check out store.  Replacement compressors, tanks, air line, and more available as well!
COMPRESSOR SPECIFICS
33% Duty Cycle (20 minutes @ 100 PSI)
150 PSI Max Working Pressure
1.2 SCFM
158°F Max / -40°F Ambient Temperature Range
Size:
8.7″ x 4″ x 6.2″ (LxWxH)
Weight:
5.5 lbs
Mountable in any orientation
TANK SPECIFICS
Ports:
2 x ¼” (-4) NPT
Rust Inhibitor:
Applied to inside of tank
Max Working Pressure:
150 psi
Size:
6.4″ x 5.5″ x 6.5″ (LxWxH) [163 mm x 140 mm x 152 mm]
Weight:
3.4 lbs [1.54 kg]
Welded on Mounting Brackets
CURLY HOSE & AIR ACCESSORIES KIT
Fill your tires and check tire pressure
Inflate air mattresses, sports balls, beach toys, etc.
Blow air for cleaning, dusting and quick removal of dust and debris.
These kits are specially designed for those who want customizable options when building their own onboard air system.
BEFORE STARTING THE INSTALLATION:
1. Read through this manual and ensure you can complete the installation once started.
2. Ensure the kit you received contains all the items shown in the Kit Layout photo.
3. It is recommended to use a good quality anti-seize on all fasteners. This will reduce the chance of corrosion on the fasteners
and will help facilitate removal, if required at a later date.
PLEASE NOTE:
This kit contains push-to-connect
fittings; using scissors or wire cutters to cut the nylon airline will distort the line and cause the connection to leak. THE AIRLINE MUST BE CUT OFF SQUARELY
WITH THE NYLON HOSE CUTTER
PROVIDED IN THIS KIT OR A SHARP UTILITY KNIFE.
AIR COMPRESSOR AND AIR TANK MOUNTING
Thread sealant or Teflon tape must be applied to all the fitting
threads installed throughout the installation to prevent air leaks.
Install the push-to-connect fittings into the check valve, then install
the assembly into the compressor head, (as shown in Figure 1).
The compressor makes an audible pumping noise when activated.
Consider this when choosing a mounting location. The location should
also be in a clean, dry area to maintain long compressor life.
Using the compressor as a template, mark and drill three 3/16”
diameter holes. Secure the compressor using the fasteners provided.
2 Choose a location to mount the air tank. Using the supplied hardware
mount the tank with the drain port facing down.
3 ELECTRICAL CONNECTIONS
Provided in the kit is a pre-wired relay receptacle to make this part of
the installation easy.
Find a convenient location to mount the relay receptacle within 12” of
the positive battery terminal. Using the self tapping screw provided,
secure the relay receptacle and install the relay.
CAUTION: Never extend the wire of the harness beyond the length
supplied.