True Refrigeration T-49-2-G-2 EA

Description

To hold product, this True T-49-2-G-2-HC~FGD01 two-section refrigerator has six PVC-coated wire shelves inside that are adjustable on
1
⁄
2
-inch increments to support various product heights. Products can be seen since the interior is lit by LED lighting, and 4-inch-diameter castors, the front set with locks, are mounted on the bottom for movement. The exterior is made of stainless steel, and its back is coated with GalFan to resist corrosion. Its interior is lined with aluminum and its stainless steel floor has coved corners.
This refrigerator has four Dutch doors. Its glass half doors are made of double-pane glass, and the solid half doors are constructed of stainless steel and lined with aluminum. Solid doors have 12-inch recessed handles that do not stick into the aisles, and the glass doors have 15-inch extruded handles for a comfortable grip. All doors close on their own and have locks to prevent theft, while magnetic gaskets snap into the door frames to prevent cold air from seeping out.
To retain temperatures, this True T-49-2-G-2-HC~FGD01 reach-in refrigerator is lined with polyurethane insulation. Its welded steel frame rail is black powder coated for durability, and the refrigeration system is bottom mounted, so users can conveniently access the unit for maintenance. Its self-contained capillary tube system controls the flow of R290 hydrocarbon refrigerant, while the evaporator and condenser fan motors are electronically commutated for even air distribution. Temperatures in this unit can be set between 33 and 38 degrees Fahrenheit.
The reverse condensing fan motor reduces buildup on the condensing coil to improve efficiency and decrease energy consumption. The motor has an automatic design, blowing for 20 seconds in a reverse section when the compressor turns on. Users should still implement common maintenance protocol to ensure it's working properly over time.
Product Details
Stainless steel exterior with GalFan-coated back to resist corrosion
Interior is lined with aluminum to resist stains
Stainless steel floor has coved corners to simplify cleanup
Durable welded steel frame rail is black powder-coated
Insulated with polyurethane foam for temperature retention
4-in.-diameter castors with locking front set
6 PVC-coated wire shelves can be adjusted in
1
⁄
2
-in. increments
Interior is illuminated by LED lighting
External temperature display
Solid stainless steel half doors are lined with aluminum
Glass half doors are constructed of double-pane glass
Door locks protect contents
12-in. recessed handle on solid doors
15-in. extruded handle on glass doors
Doors self-close to conserve energy
1-piece magnetic gaskets snap into the frame for an airtight seal
Refrigeration System
Bottom-mounted condensing unit provides convenient maintenance access
Capillary tube system does not need extra tubing since it is self-contained
Uses R290 hydrocarbon refrigerant
Temperature holding range: 33-38 degrees F
Electronically commutated condenser and evaporator fan motors reduce heat production and energy consumption
Reverse condensing fan motor blows in an opposite direction for 20 seconds when compressor turns on
Evaporator is epoxy coated to resist corrosion
Dimensions & Utilities
Shelves: 24
9
⁄
16
in. W x 20
3
⁄
4
in. D
Overall: 54
1
⁄
2
in. W x 31
1
⁄
8
in. D x 83
3
⁄
8
in. H
5.4 A,
1
⁄
2
HP
115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug
Refrigerator, reach-in, two-section, framed glass door version 01, (2) glass & (2) stainless steel half doors, (6) PVC coated adjustable wire shelves, LED interior lighting, stainless steel front, aluminum sides, clear coated aluminum interior with stainless steel floor, 4" castors, R290 Hydrocarbon refrigerant, 1/2 HP, 115v/60/1-ph, 5.4 amps, NEMA 5-15P, cULus, UL EPH Classified, Made in USA The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.