Used OKK HM80S Horizontal Machining Center

Description

Used OKK Horizontal Machining Center (2) pallets, Model HM-80S, Serial number 104, Manufacture number MA98321A. Axis travel-X  1000 mm (39.37"), Y  850 mm  (33.46"), Z  820 mm (32.29")- 2-800 mm (31.5") square pallets on a rotary APC, 1 degree indexing table-Maximum work piece is 1000 mm (39.37") swing diameter by 880 mm (34.65")-Table load capacity 1,100 kg (2,425 lbs.)-116 tool capacity (two 60 tool magazines) -Cat 50 spindle taper with 454.7 kg (1000 lbs.) through the spindle coolant-Max tool diameter 230mm (9.06") 115 mm (4.53" diameter without adjacent tools) x 450 mm (17.72") Maximum length-Max tool weight 25kg. (55.12 lbs.)-Max spindle motor output 22 kW / 18.5 kW-(25 hp. continuous) / (30 hp. 30 minutes). Maximum spindle speed 13,000 rpm.-40m/minute (1574 IPM) Feed rate 1mm/min. to 20000mm/min.(0.039 to 787 IPM) in feed-hand held coolant gun-Fanuc 16iM control with 4 axis simultaneous positioning and linear interpolation, helical interpolation, extended memory, (1280 meters),rigid tapping, PC card slot, 48 additional offsets, tool life management, coordinate rotation, custom macro. chip conveyor.
Buyer to pay for Rigging and Trucking